1.Acupuncture,magnetotherapy,infrared thermal moxibustion,pillow-style traction
2.Liquid crystal backlighting display,screen is large and clear.
3.Automatic shutdown without operating for 3 minutes.
4.Use imported chip, reliable performance
5.Multiple functions, the machine can be used at home.

 

NAME	Cervical rehabilitation apparatus
POWER	AC 220V/50Hz
DELIVERED POWER	15W
AMBIENT TEMPERATURE	5-40centidegree
RH	Less than or equal to 80%RH

1.How to use
Use it once or twice a day.Time interval of using is not less than three hours.Every time for 15 or 30 minutes.A cycle for ten days,in each cycle can rest for a day or two.Sticking to the long-term use will lead to better results.

2.Use method
(1)Choose flat bed and appropriate environment,and set cervical rehabilitation in correct direction.
(2)Firstly,let the side of controller plug with design upwards.Insert flatly into the socket of cervical rehabilitation controller.Then insert power plugs into 220V power socket.At this time,power indicator of cervical rehabilitation apparatus light up.And hear"Be..."sound,which indicates that the recovery instrument has been connected.
(3)Temporarily not open the controller power key!Clean skin with wet towel,supine in cervical rehabilitation apparatus,and keep two traction spring near the shoulders(If the instrument is inverted,it cannot play traction).Keep head backward, mild turning around the neck,in order to make the neck skin full access to the four electrode head.Body relaxed, then handheld controller and press the button.When using can also lie on side,which also have the same effectiveness.

3.Control procedures
LCD controller operating methods:
(1)Insert the host controller plug into the socket controller.
(2)Press the open/strong button,showing text"minutes 00","00amplitude","function","automatic" "manual" and “infrared thermal moxibustion" pattern.
(3)Press the time button,can select 15 minutes or 30 minutes��If not click this button, the fourth and fifth and sixth step will not be executed.
(4)Press mode adjustment key
A. Manual button:At the boot,microcomputer program has default for manual mode "1".Press the manual button,you can choose different models depending on your needs.Each time you press the screen will have corresponding model number.
B. Automatic key:Press this button and enter automatic conversion mode procedures, screen shows"automatic".Then electronic instrument input six modes in circulation
(1-6).In the automatic conversion to each mode screen will have corresponding model number.
(5)Press the "open/strong" button to increase strengthen,"weak/shut"button for weaking.At the boot.it has set for the weak.32 magnitude of amplitude can be adjusted.
(6)Press hot moxibustion key:Screen shows "infrared thermal moxibustion" and "the sun."At the same,infrared thermal moxibustion ring in the host lights and produces warm.
Remarks:At the end of using time, buzz sound will clew you.You can ease use and rest for a while.

4.Instructions for use method of "ashi"system.
Ashi point is human any pain.Ashi system in the cervical rehabilitation apparatus through Ashi electrode in human body, is an arbitrary adhesion point of use aching discomfort, and choose more convenient.Firstly,connect Ashi electrode patch and wires,paste in pain part,then get through the host,and use in accordance with the "controller use operation".After use, please, paste electrode patch to both sides of winding plate.Lay the conductor winding line on the shelf.

1.Cervicalvertebra instrument has automatic safety device.When you open or after use within 3 minutes without any operation,the machine will automatic shut down.Ensure
the cervicalvertebra instrument service life longer, safer and more electricity.
2.Do not press the power button and time setting button again before contact with four electrode head.Firstly,shoud lie on your back.Make the neck skin contact four electrode head,then press the controller power switch key and time-set button.The body away from electrode head or adjust gesture in using,you should turn it off.
3.It is unfavorable in hot weatheruse to use infrared thermal moxibustion.The patient,whose skin is sensitive,use hot moxibustion or electrode head too strong for a long time.There may be local skin aglow, peeling, bubble phenomenon.Suggest a week later, or suspended by using thermal moxibustion ,decrease intensity and time to adapt to the skin after to use according to your needs.
4.Two Ashi electrodes patches shoud be posted at the same time to affected part. Two Ashi electrode patch can not touch each other,which is to avoid short-circuit and adhesion.
5.The Ashi electrode and host, is not Shared four tip
6.Ashi electrode patch for silastic products will natural aging.Therefore,before each use patch,please clean the skin.After use,clean patch to prolong the using life.
7.Magnetic pillow surface contain magnetism,shoud be put far away from sensitive products.
8.Using initial, current stimulation is normal phenomenon.At this point in the use of electrode head, sometimes may have tingling, which is the natural phenomenon.Then if heating electrode head and skin,and keep moist, this phenomenon will change.
9.Before sleeping and after bath, use effect is better.