1.Intelligent needle char
2.Traditional massage
3.Cupping scrapping
4.Foot char

1.Power:Three (7) alkaline dry
2.Frequency:50HZ
3.Host size:153cm×70 cm×2.8 cm

1.Read LCD screen
(1)The simulation of six function:Each kind of function in the same way under the discipline has four different feeling.
(2)Work style synchronous indicating arrow:The arrow place for machine working condition.
(3)Human schemes.
(4)Working for parts (meridians):Display area is appropriate for working.
(5)Four kinds of automatic mode:Each kind of automatic mode, are recommended for clinical experts corresponding simulation shows the real function of six parts all or part of the best combination of automatic changes.
(6)Regular time to show, show a countdown.
(7)Repeat function display:"Repeated" shows,represent this machine repeate current output signals, namely,repeats recent feeling.No show"repetition",output signal changes every 15 seconds.

2.Using methods with patch:
(1)The preparation before use:Add battery, and connected patch, wire and the host, took the film of electrode patch.
(2)Paste the electrode Slice on the affected part:Neck,shoulder,waist,knee.
(3)Correct use:
Turn on power: Rotate button(strength/power) from the (OFF) knob clockwise.The screen start display and machine is thump state. Timing for 15 minutes. Don't repeat.
Choose treatment:Press the manual button.You can choose six ways,such as bang, acupuncture and massage, massage and cupping, scrapping. Namely,the arrow point to selected instructions. Automatic mode button pressed can select step-down, muscular neck, shoulder, waist and leg four ways, will display mode selected.
Strength adjust:Rotate (strength/power) knob clockwise, strength increasing until the appropriate.
"Repeated" options:According to the need to press repeat key,select(or give up)repeat function timely.
Treatment time:Press the timing buttons,5, 10, 15, 20, 25 and 30 for six treatment period to choose. A position in a general 15 minutes,1-2 times a day,or according to patients actual condition, prolong or shorten treatment time and frequency.Clocking time out,it will be turned off.If you want to continue to use, should shut off power three seconds, and then restart your machine.If you want to change therapeutic part in treatment.Namely,change electrode patch position.Please be sure to (strength/power) to (OFF) knob.Then change the therapeutic part, restart your machine in order to avoid sudden excitement. If you stop using in the healing process,please remove electrode patch after take off mechine.
Please turn off the power after use:Rotate (strength/power) button press counter-clockwise to (OFF) shutdown.
(4)After shutdown,please use hand to hold the plug and pluck wire.Don't take strong pull plug wire.

3.The method of cooperating with electric slippers
(1)Electric slippers front or rear jacks are wires
(2)Using methods:
The conductor two needle inserted into electric slippers at the front or back within the aperture, then the conductor plugs host.Then open hosts to use.Operation methods and use the same patch.

4.Products of cleaning and maintenance and preservation
(1)Products of cleaning and maintenance:
Host cleaning:Wipe the dirt on the host with the cotton dips have soap.
Note: do not wipe with hinner or paint alcohol.
(2)Clean electrode patch:Use wet cloth to wipe gently,or tape gently stick to dust on the surfaces.

1.Please put away from children.
2.Do not remove the mainframe or drop from the high or forced host privately.
3.Do not be preserved host in high temperature, humidity and direct sunlight.
4.When not in use for a long time, please take battery out..
5.Do not remove or repair,which may cause accidents or malfunction.
6.The warning signs and diagram shown mark in specifications,whose purpose is to enable you use the product safe and properly, and prevent damage to you and others.