1.Time Settings
(1)At first, before the use of glucose meter to install batteries. Open the lid of the battery glucose meter, according to a negative direction is put CR2032 (3V lithium battery) (about 1,000 times available) .
(2)Press set key (located near black button batteries storehouse), instrument enter setup, that can be seen in the display of the year in the digital, each time you press the "M" button to add a year, hold "M" key can be quick setup. After modification, press set key, the screen in the year after setting "month" digital began flashing.
(3)In the same way, we can set the "year" - "month" - "day" - "and" - "time pattern (AM/PM), -detection unit mmol/L and mg/dl - temperature unit (c/degrees f).
(4)After complete the above set, continue to press set key, then in the screen will appear slowmotion effects and twinkle "M" button. If you want to delete all memory value glucose meter, press the "M" button, then, that will turn in the screen "..." and "OK" symbols, "says all memory has been deleted. If you don't need to remove the memory, continue to press set key, the instruments will shutdown, install the battery cover.
2.Using methods
(1)Take blood, unscrew picks pen into blood, then cover needle head spin down blood needle tip, protect cover, he picks the lid. Rotating picks pen calibration rings, selected picks pen depth (1-5 were five scale, 1-5 from shallow to deep). Finally he picks tighten the cover.
(2)Take test pieces from dipstick barrels (attention, remove the blood test pieces into the area, handheld area and electrode accept area) try not to get into electrode accept area. Recover the cover immediately after the test paper barrel prevent dipstick damp.
(3)Put test pieces into glucose meter. This instrument will automatically boot, and displayed on the screen. "in" CHK Then show room, before the test shows that a flickering point, this can be adopted when measuring.
(4)Remove the needle already installed picks, invisible hands handholding and pull back, there will be kacha sound, middle button protrues. The finger (generally will be in the area is the most common finger or earlobe, the position is middle finger and ring finger, and the study on both sides of the conflict, blood) button hole. Then squeeze a small drop approximately 3 muon l fingers into blood, close to cover (blood for the principle, do not force. Automatic import blood test and start in response. In the screen will appear digital "10" and start the countdown. With the countdown to the "0" screen automatically shows your blood sugar.
(5)Spare test pieces, instrument can be turned off. Measured values will be stored at the store 180 groups.
3.Memory read
(1)Press the instrument of positive "M" button, glucose meter is opened.
(2)Once again, the average for seven days, and continue to press for 14, 20 day average, average, average twentyeight days. When pressed to sixth, square shows for recent measured glucose values, continue to press the "M" button, can read other memory. After reading by the "M" button can be shutdown about 3s.
(3)Delete: completion time memory value after temperature setting to press set key, then will appear english slowmotion effects and meaning of the cancellation of small "M" (memory) if you want to cancel the instrument storage of glucose values ,press the "M" button. |
Profiles
Class:Omai Blood Glucose Meter Serie 
